BJSPL - BWT 110

Product Identification

Product ID:BWT 110
MSDS Date:03/31/1986
FSC:6850
NIIN:00F013614
MSDS Number: BJSPL

Responsible Party
INDUSTRIAL CHEMICAL LAB., INC.
1015 N. 14 ST
OMAHA, NE 68102

Emergency Phone: (402) 342-4248

Info Phone: (402) 342-4248

Cage: 94525

Contractor
INDUSTRIAL CHEMICAL LABORATORIES INC
OMAHA, NE 68102 US

Telephone: 402-342-4248

Cage: 94525

Ingredients

SODIUM POLYMETAPHOSPHATE

CAS: 50813-16-6

Fraction By Weight: 100%

ACGIH TLV: 10 MG/CUM

Hazards

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYES: IRRITATION

First Aid

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
INGESTION: DILUTE W/WATER. CONSULT PHYSICIAN.

Fire Fighting

Flash Point:NONE
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:FOR MINOR SPILLS, SWEEP UP & TRANSFER TO A
CONTAINER. DISCARD IN THE GENERAL DUMP. RESIDUE MAY BE WASHED AWAY
W/WATER.

Handling

Handling and Storage Precautions:STORE IN DRY AREA. NO SPECIAL HANDLING
PROCEDURE IS REQUIRED. KEEP OUT OF REACH OF CHILDREN.

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED. USE DUST MASK IF DESIRED.
Ventilation:LOCAL EXHAUST: NOT REQUIRED. MECHANICAL: ADEQUATE.
Protective Gloves:NOT NORMALLY REQUIRED
Eye Protection:NOT NORMALLY REQUIRED
Other Protective Equipment:NONE
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:>2000F
Vapor Pres:NON VOL
Vapor Density:NON VOL
Spec Gravity:1.2
Evaporation Rate & Reference:NON VOL
Solubility in Water:APPRECIABLE
Appearance and Odor:WHITE GRANULAR SOLID, ODORLESS.
Percent Volatiles by Volume:0%

Stability

Stability Indicator/Materials to Avoid:YES

Disposal

Waste Disposal Methods:NO SPECIAL HANDLING IS REQUIRED. EMPTY
CONTAINERS MAY BE INCINERATED OR DISCARDED W/GENERAL TRASH.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.